Filter
Top Products
17
Programming
Programming the department status
ABCDEFG* ➜
x
➜ (
s
➜ ) Department key (➜
S
)
(Press s to program departments 5 to 8.)
Parameters: Selection: Entry:
A Sign +/- + sign* 0
- sign 1
B Normal/SICS (Single Item Cash Sale) Normal* 0
SICS 1
C VAT4 or TAX4 No* 0
Yes 1
D VAT3 or TAX3 No* 0
Yes 1
E VAT2 or TAX2 No* 0
Yes 1
F VAT1 or TAX1 No 0
Yes* 1
G Entry digit limit (0 to 7 digits) 0 through 7 (default: 7)
• Sign
Assign + sign to departments in which normal sale amounts are to be entered, and - sign to
departments in which payments for items such as refunds, bottle returns or other minus
transactions are to be entered.
• SICS (Single Item Cash Sale)
This allows the operator to finalize the transaction entry by entering the unit price of one item and
pressing the department key set for SICS. If the unit price is preset for the department key, you
can finalize the transaction by pressing the department key only.
• Entry digit limit
Setting this parameter for applicable departments prevents the accidental entry of too large an
amount during a sale. For example, if the highest entry to be allowed is 9.99, enter 3. If 0 is
entered you cannot enter a price and only a preset price can be entered.
Programming preset unit price
Unit price
(max. 5 digits) ➜ (
s
➜) Department key (➜
S
) (Default: 0.00)
(Press s to program departments 5 to 8.)
The PLU function allow speedy key entries whereby a preset price is automatically called up when
a code is entered. Up to 80 PLU settings are possible. Each PLU belongs to a department and
acquires the parameters of the department. The cash register was factory preset so that PLU1 to
10 are assigned to department 1 and unit price 0.00.
(Press s to program departments 5 to 8.)
To disable a PLU, enter the PLU code and press P, then press v and S.
PLU code ➜ P ➜ Unit price (max. 6 digits) ➜ (s ➜) Department key ➜ S
For the next PLU code programming
When the next PLU code to be programmed does not directory follow the one just entered.
PLU Programming