Filter
Top Products
I5 Nonvolatile memory (NVRAM) settings
I6 Link diagnostics
I7 Product configuration
Mn Operates Speaker
M0 Speaker always Off.
* M1 Speaker On until connect.
M2 Speaker always On.
M3 Speaker On after dial, until connect.
On Returns online
O0 Returns online.
* O1 Returns online and retrains.
P Sets pulse dial (for phone lines that don't support touch-tone dialing).
Qn Displays/suppresses result codes. Also controlled by DIP switch 3.
* Q0 Displays result codes.
Q1 Quiet mode; no result codes.
Q2 Displays result codes only in Originate mode. Cannot be stored in
NVRAM.
Sr.b=n Sets bit .b of register r to value n (0 = OFF or 1 = On)
Sr=n Sets register r to value n. See list of S-Register settings.
Sr? Displays contents of S-Register r.
T Sets tone dial.
Vn Displays verbal/numeric result codes. Also controlled by DIP switch 2
V0 Numeric codes.
* V1 Verbal codes.
Command Function/Options
Xn Sets result code displayed. The default is X4.
Xn Setting
Result Codes X0 X1 X2 X3 X4
0/OK X X X X X
RMM Rack Mount Modem; User's Guide
file:///C|/WEBPAGE/guides/rmm/rmm_manl.htm (8 of 21) [2/7/2000 10:55:43 AM]