Filter
Top Products
6
SE-UM-1901-0502
Installation
Congratulations on your purchase of a Westinghouse 19” LCD Monitor. Sleek and practical,
this lightweight and wall-mountable LCD monitor delivers a crisp and clear display optimized
for 1280 x 1024 display resolution.
Package Contents
• LCD Monitor (19”)
• Detachable Base Stand
• Cables
o DC Power Supply Adapter
o AC Power Adapter Cord
o VGA (HD15) Male – Male Cable
o 3.5 mm Male – Male Stereo Audio Cable
• Literature
o User’s Manual
o Warranty Card
1. Attaching the Base Stand to the LCD Monitor
Attach the base stand to the LCD monitor stand neck. Align the holes and tabs; press in and
snap into place. To remove the base stand, press the tabs on the bottom of the stand neck
and remove the base.
2. Connect the VGA and Audio Cables
Connect a VGA cable (to the connector labeled “D-SUB”) and an audio cable (to the connector
labeled “AUDIO-IN”) from the back panel of the LCD monitor to your PC.
3. Connect Power Cables
Connect the DC power adapter cord to the LCD Monitor (to the connector labeled “DC-IN”)
and then connect the female AC power cord to the adapter. Plug the AC power cord into a
properly grounded AC outlet.
4. Turn the Power On
Press the power button on the front of the LCD monitor. The LED light will turn green if a
signal input is detected or it will be orange if no input is detected.
Auto Adjust
Although a computer can detect the new monitor with the built-in VESA Plug & Play feature,
the Auto Adjust function can be used to enhance the display. To perform the Auto Adjust: