Filter
Top Products
OSD Menu Functions
English
All the function settings for the LCD monitor are controlled via the control keys located on
the bottom part of the front panel. To display the OSD main menu, press the “Menu”
keypad button on the control keys. (Note: The OSD menu display will disappear
automatically after approximately 10 seconds, if no action is taken.)
The LCD monitor has been adjusted to optimal settings before shipment. Adjustments to
the monitor settings can be made using the OSD menu.
• Press the “Menu”
button to display the OSD.
• Press the ▲ or ▼ button to select the function to be adjusted.
• Press the X button to access the function to be adjusted.
• Press the ▲ or ▼ button to select the sub-function to be adjusted.
• Press the W or X buttons to change the current setting of the sub-function.
• To go back to the previous menu, press the
button. Changes are saved
automatically.
Source
• To exit the OSD menu press "Menu"
again. It automatically will save any changes
that have been made.
Resolution & Frequency
Audio Menu
Misc Menu
Image Menu
Info Menu
Color Temp. Menu
NOTES:
• The OSD turns off several seconds after you stop pressing the buttons while
performing an adjustment.
• Any changes are automatically saved in memory when the OSD turns off. Turning off
the power should be avoided while using the menu.
• Adjustments for clock, phase, and positions are saved for each individual signal timing.
Except for these adjustments, all other adjustments have only one setting, which
applies to all signal timings.
• The icon color will change from blue to white when a function is selected.
11