Filter
Top Products
4
®
COMPRESSION SELECTOR
By default, the T36 compression is set to
“Off” for normal operation, or “1:1” com-
pression. For hearing assistance applica-
tions, the compression selector can be set
to “On” for “2:1” compression.
To change this setting, open the battery
door and locate the Compression
Selector (FIG. D).
To turn on compression (2:1), use a
plastic tuning wand and slide the
“Comp” switch to the position marked
“2:1.” To turn off, slide the “Comp”
switch to the position marked “1:1.”
C
HANNEL LOCK
By default, the T36 channels are
unlocked to allow the user to change
frequencies as needed. If desired,
channels can be locked to prevent
users from changing the channels.
Note: The Channel Lock only locks the
electronic frequency; it does not physi-
cally lock the channel selector knob.
To lock or unlock channels, open the
battery door and locate the Channel
Lock (FIG. D). To lock the current
channel, slide the “CH Lock” switch to
the position marked “ “. To unlock
the channels, use a tuning wand and
slide the “CH Lock” switch to the
position marked “ “.
BATTERY INFORMATION
The T36 transmitter can use two (2)
alkaline AA batteries (BAT 001) or
two (2) AA rechargeable batteries
(BAT 026). Note: The BAT 026 pro-
vides longer life than other recharge-
able batteries. For best product per-
formance, do not substitute other
rechargeable batteries and chargers.
L
OW BATTERY INDICATOR
The “Power On” indicator (FIG. B) will
flash to indicate low battery.
EXPECTED BATTERY LIFE
Alkaline batteries
(BAT 001): 30 hours
Rechargeable NiMH Batteries
(BAT 026): 20 hours
Min.14 hour recharge time.
If the T36 transmitter is equipped with
rechargeable batteries, up to 12 units
can be charged at one time in the
optional CHG 3512 or CHG 3512
PRO multi-charger, or up to two units
in the CHG 3502 dual bay charger. For
ordering information, please contact
Williams Sound at 800-843-3544.