Filter
Top Products
Appendix B: Settings Worksheet / Miscellaneous
89
11. Click No to complete the download process. Press any key and power the unit off by
pressing the <Power> key when the following message is displayed:
Figure 88: Complete - Power Off Message
12. After powering off the scanner, turn it back on by pressing the <Power> key.
To signify that new firmware has been uploaded to a scanner, the unit emits
three loud beeps the first time it is powered on after a software installation.
The following message is also displayed in the scanner information window:
Figure 89: New Program Message
Displays
upon startup
after Program Installation
13. After verifying that the kernel has properly loaded, press the <Esc> key or any other
key, then turn off the scanner by pressing the <Power> key. If indicated by
Furniture Wizard Software, load any accompanying firmware updates using the
procedures in Section 5.3.2: Furniture Wizard Firmware Update Procedures.