Filter
Top Products
13
Cables
Power/Data Cable
The Power/Data Cable uses 4-pin XLR connectors on either end and consists of two 14
AWG conductors and a 22 AWG twisted, shielded pair. The shells of the two XLR
connectors are not electrically connected together -- this prevents large power currents
from flowing from chassis to chassis of the equipment. The twisted pair shield is
connected at male XLR connector end only.
XLR Pin # Wire Color Function Size
1 White Ground 14 AWG
2 Green Data - 22 AWG
3 Red Data + 22 AWG
4 Black 24VDC 14 AWG
DMX512 Control Cable
The DMX control cable from the lighting console to the power supply is a five conductor
cable with 5-pin XLR connectors on each end. The wiring pin out is specified by the
USITT DMX512/1990 standard.
XLR Pin # Function
1 Common
2 Data -
3 Data +
4 Talkback -
5 Talkback +