Filter
Top Products
6
7. To remove the existing RAM module, use your fingers to unlock the two locking clamps
at either side of the module by pushing the clamps in the direction of the arrows shown,
see
Figure 9. The module should pop up from its socket. Lift out the RAM module.
Figure 9 Removing the RAM module
8. Insert the new RAM module into the connector of the original module, and then press
down on the module so that the two locks will snap in place, securing the module.
9. Replace the access cover in the reverse order as shown in Figures 5 and 6.
10.Reconnect the power cord and power adapter.
11. Proceed to "Verifying the Mobile Thin Client’s Operation."