Filter
Top Products
4
Installing the Upgrade Kit
To install the 1-GB, 2-GB, or 4-GB flash and one (1) 1-GB RAM Upgrade Kit in an X90L or
X90Le mobile thin client:
Caution
Follow all precautions listed in the Quick-Start Guide that came with your
mobile thin client for disconnecting and reconnecting the mobile thin client.
1. Perform a proper shutdown of the mobile thin client by closing all files and ending your
session, and then press the power button to turn off the mobile thin client.
2. Unplug the power cord and power adapter, and remove any other cables from the
mobile thin client prior to disassembly.
3. Turn the mobile thin client to the back side, and then using your finger nails or the
plastic alignment tool, unsnap the switch covers as indicated in
Figure 5.
Figure 5 Unsnapping the switch covers
4. Open the lid of the mobile thin client. Using the plastic alignment tool or your finger
nails, carefully pry off the switch cover starting at the corners as indicated in
Figure 6.
Figure 6 Prying off the switch cover