Xantech HD88CC5 Switch User Manual


 
08905150B - 6 -
REAR PANEL
[1] SOURCE LOOP-THROUGH CONNECTION
The source inputs are buffered to provide an output at the same level as the input – i.e. Unity Gain
(assuming a 75-ohm termination is on the output). Use these connections for HD88 expansion
systems. The buffers are an active circuit. The HD88 must be powered on for an active connection.
The jacks are color-coordinated to match the HD source component output color scheme.
[2] SOURCE INPUTS
These are Gold-plated RCA jacks
providing a connection from the output
of a source component to the HD88.
The jacks are color-coordinated to
match the HD source component output
color scheme.
[3] AC POWER INPUT AND
EUROPEAN POWER SELECTION
SWITCH
This Standard IEC 3-Conductor AC Line
Cord Receptacle is utilized to plug-in a
3-conductor power line cord. Be sure to
note if the power receptacle is Domestic
(120VAC) or International (240VAC).