Filter
Top Products
20
6 Inverter Operation
Operation with the DC Input Cable
Follow these procedures and guidelines when using
the inverter module as a stand-alone unit.
1. When the DC input cable is properly connected to
a 12 V outlet, the light on the inverter module will
glow blue, indicating the inverter is ready.
2. Plug the product(s) you want to operate into the
AC outlet or USB port and switch them on (if
necessary).
Operating Guidelines
• As the battery is used, its voltage begins to fall.
When the inverter senses that the voltage at its
DC input has dropped to 10.5 V, the inverter
automatically shuts down and the light glows red,
indicating a fault. This prevents the battery from
being damaged. Turn off any devices that the
inverter is powering.