Filter
Top Products
Connecting DC Cables
12
Cabling Procedure
To connect the DC cables:
1. Cut the cables to the correct length.
2. Strip the appropriate amount of insulation from one end
of each cable and attach the connectors that will join the
cables to the battery, battery isolator switch, or fuse
block. The connectors you use must create a permanent,
low-resistance connection.
Figure 4 Installation for Heavy Loads
FROM ALTERNATOR
OR CHARGER
DEEP-CYCLE
AUXILIARY
BATTERY
VEHICLE
STARTING
BATTERY
ISOLATOR
GROUND TO
VEHICLE
CHASSIS
TO VEHICLE
GROUND TO
VEHICLE
CHASSIS
TO DC
LOADS
FUSE OR
CIRCUIT
BREAKER
DEEP-CYCLE
AUXILIARY
BATTERY
GROUND TO
VEHICLE
CHASSIS
FUSE OR
CIRCUIT
BREAKER
PROwatt
600