Filter
Top Products
©2002 Xantrex Technology Inc. All Rights Reserved
P/N 973-0019-01-02 Rev A 06/2002
7
Installation (continued)
Cable Installation into Fuse Block
For Fuse Blocks designed for C-Type Battery Cables (TFBxxxC)
1. Strip back 1 inch (2.5 cm) of the insulation on the
battery cable.
2. Insert the cable into the terminal block (ensure all
conductor strands are in the block)
See Figure 3.
3. Tighten the hex screws to 10-15 ft/lbs.
4. Repeat Steps 2 and 3 for the connection to the other
end of the fuse block.
Figure 3
Installation for C-Type Battery Cables
Stripped
back 1 inch