Filter
Top Products
78 Phaser® 8200 Color Printer
Specifications
wear self-contained breathing apparatus, pressure demand, MSHA/NIOSH
approved, and full protective gear.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
SPILL OR LEAK: Not applicable
SECTION 7 - HANDLING AND STORAGE
HANDLING: No special precautions, when used as intended.
STORAGE: Avoid high temperatures. Keep ink below 60 degrees C
(140 degrees F)
SECTION 8 - EXPOSURE CONTROL - PERSONAL PROTECTION
EXPOSURE GUIDELINES: None established.
ENGINEERING CONTROLS/PERSONAL PROTECTION: No special personal
protection indicated, when used as intended.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE/ODOR: Waxy solid. Black, blue, red, or yellow in color/Faint
odor
SOLUBILITY IN WATER: Insoluble
MELTING POINT: Approximately 100 degrees C (212 degrees F)
SPECIFIC GRAVITY (Water = 1): Approximately 1, @ 25 degrees C
(77 degrees F)
SECTION 10 - STABILITY AND REACTIVITY
STABILITY: Stable.
CONDITIONS TO AVOID: Temperatures above 200 degrees C (392 degrees F)
INCOMPATIBILITY WITH OTHER MATERIALS: None
HAZARDOUS POLYMERIZATION: Will not occur
HAZARDOUS DECOMPOSITION PRODUCTS: Material may decompose into
toxic byproducts when heated to temperatures above 200 degrees C
(392 degrees F).
SECTION 11 - TOXICOLOGICAL INFORMATION
TOXICITY: Oral LD
50
>5 g/kg (rats); practically non-toxic
SKIN IRRITATION: Primary Dermal Irritation Index = 0.0; not skin irritants.
CARCINOGENICITY: Components not listed by IARC, NTP, or OSHA.
SECTION 12 - ECOLOGICAL INFORMATION
No known impact