Xerox 2045 Printer User Manual


 
For more information on Genuine Xerox Supplies, call 1-800-822-2200 in the USA and 1800-668-0133 in Canada 5
drawer is closed, the user interface should recognize the custom size. This size must match the size
selected in the application used on your client desktop.
Front of paper tray
Feed direction
When designing a typical 5-bank tab job, page setup size must be set to 11” x 9” Tab positions
should be centered at 1
1
/
2
”, 3
1
/
2
”, 5
1
/
2
”, 7
1
/
2
”, and 9
1
/
2
” respectively. It is also recommended that you
maintain a distance of
1
/
4
" from the top of the landscape edge and the text space per tab should be
limited to 1
1
/
2
”.
Scored Materials
Scoring creates a crease in a sheet of paper, usually heavyweight, for applications such as greeting
cards and trifold brochures. These types of materials can be run from any tray in either LEF or SEF
orientations, however, feeding performance will be optimized with score lines running parallel to the
tray feed direction.
Please be aware that the xerographic process has limitations when transferring toner onto a sheet of
paper close to any scores because of a depression or bump on the paper as a result of the scoring
process. The printed output will exhibit a deletion near the score if printed areas are too close. To
avoid this deletion of image or text, jobs should be designed with printed areas at least ¼ inch (6.4
mm) away from the score.
Coated One-sided Papers (C1S)
Coated one-sided papers (C1S) can be run from SMH tray 3 or optional HCF tray 4. Most C1S
papers are sold using points of thickness rather than weight. Refer to the Recommended Materials
List for the appropriate weight settings to use for Xerox Digital Color Supreme Gloss C1S papers. As
a general rule, 8 pt. and 10 pt. C1S grades should be run the 151 220 gsm setting whereas 12 pt.
should be run in the 221 280 gsm setting. Since many 14 pt. materials will exceed the image
transfer capabilities of the DocuColor 2045 / 2060 / 5252 print engine, it is recommended to purchase
small quantities to ensure your expectations are met, prior to committing to large runs.
C1S papers are commonly used in high-quality applications with high toner coverage on the coated
side. Image quality on the coated side will be very good; however, due to the nature of the paper, the
second side will exhibit very different print quality. If superior image quality is required for both sides,
Xerox Digital Color Elite Gloss and Silk (C2S) products are recommended.