Xerox 4090 NPS Printer User Manual


 
CLEARING PAPER MISFEEDS AND JAMS
XEROX DOCUPRINT 4050/4090 NPS TROUBLESHOOTING GUIDE 4-23
6. Close the side and top covers.
7. Press the Continue button to resume printing.
Adjusting dual stacker tray scuffer arms
Paper jams can occur when the paper does not stack smoothly in the
stacker trays. If some papers stack well while others do not, the
scuffer arms may need to be adjusted.
Note: The scuffer arm weights on some printers are bolted in place.
These must be adjusted by a service representative.
The adjustable weights are located on the underside of the scuffer
arms, on a track down the center. To adjust them:
1. Slide the weight right or left along its track under the scuffer
arm.
If the paper is driven too far up the outside edge of the tray,
move the weight toward the machine.
If the paper is not driven far enough into the tray, move the
weight away from the machine.
Note: For lightweight paper move the weight toward the
machine; for heavyweight paper move the weight away from the
machine.
Figure 4-6. Adjusting scuffer arm weights
1 Scuffer arm
1