Filter
Top Products
Page 11-34 Xerox Document Centre 440/432/430/426/425/420 User Guide
Fax Setups
On the DC440/432/430/425 both Server Fax and Embedded
Fax can be installed on the Document Centre, but only one
service can be enabled at any one time. If both are installed
they must be configured separately.
NOTE: Which ever option has been enabled, the Fax tab will
retain the same name.
NOTE: Only Embedded Fax can be installed on the DC426/
420
For more information about Embedded Fax Setups please
refer to Embedded Fax Setups - page 11-37
Access the Fax Setups
Quick Pathway
¾Select
[Access] on the
Control Panel
¾Enter Key Operator
PIN - see NOTE below
¾Select [Fax Setups]
¾Select the option
required.
¾ Select [Access] on
the Control Panel.
A pop-up window will be
displayed on the Touch Screen.
¾ Select [#] on the Control
Panel and use the number
keypad to enter a Key
Operator PIN - see NOTE
opposite.
¾ Select [Enter] in the pop-up
window.
NOTE: These changes can only be made when a PIN
(Personal Identification Number) which has been
assigned Key Operator access rights is entered. The
default password is #22222 which may be used if PINs
have not yet been assigned.