Xerox 525/1050 Printer User Manual


  Open as PDF
of 2
 
Specifications
For more information on the Xerox DocuPrint
®
525/1050 and 525/1050MX, call 1-800-ASK-XEROX
or visit us on the web at: www.xerox.com/print
The DocuPrint 525/1050, 525/1050MX Continuous Feed
Print Engine
Pre- and Post-Processing Control
The flagship in Xerox’s Continuous Feed family, it sets a new standard for productivity in any environment and now features MICR capability.
At 244 feet per minute, it’s our fastest continuous feed printing solution. With web capacity of 19.5 inches, it’s our widest. And 600 dpi resolution
makes it our highest quality performer. You also get high-speed scalable RIPing, complex document
production, industry-leading reliability and the flexibility to process and print multiple data streams.
This flexibility is now extended to include a new optional Customer Changeable Housing (CCH) to enable
easy switching of the developer module to run MICR and non-MICR applications. The CCH kits are
upgradeable, and it’s fully supported by Xerox’s end-to-end service—unmatched in the industry.
• Pinless/pinfed switchable
• Blue laser diode technology
• Engine speed: 244 feet per
minute (74.37 meters/minute)
or 195 feet per minute (59.44
meters/minute) switchable
• Full-color touch-screen graphical
user interface (GUI)
• Job setup and control while run
• Print engine controller:
— Double Xeon
— 512 MB Memory/40 GB HDD
— Read/Write CD-ROM
— Synchronization Verification
System (SVS)
— Markless Offset
• Requires one DocuPrint 525 engine for the simplex configuration
• Customer Changeable Housing (CCH)—Optional
— MICR upgrade kit
— Standard toner upgrade
•
Depth 39.76
"
/1010 mm
•
Width 82.8
"
/2103 mm
•
Height 61.02
"
/1550 mm
•
Weight US Version: 2,403 lbs
(1090 Kg)
EU Version: 2,425 lbs
(1,100 Kg )
Requires two DocuPrint engines plus a duplex kit for a duplex configuration.
Total space requirements will be driven by configuration option:
• In-line
• 90° Turn
• Parallel Z
• MultiPlex (3 engines)
• MICR supported in upstream engine only
• Type 1 interface
• Xerox Print Line Bus (PLB)
— Connects each device in print line via a Print Line Bus (PLB) box
— Monitoring of all devices in print line via a GUI
— Up to 10 PLB interfaces per print line
— Enables mix and match of various pre-/post-vendor devices
in same line
• Xerox Print Line Bus (PLB)
— Connects each device in print line via a Print Line Bus (PLB) box
— Monitoring of all devices in print line via a GUI
— Up to 10 PLB interfaces per print line
— Enables mix and match of various pre-/post-vendor devices
in same line
Resolution
Interfaces and Connectivity
Paper Support:
pinless, pinfed, preprinted, plain, boxed fanfold forms and roll-fed paper
• Up to 2 host connections per print engine
• Up to 4 host connections for 1050 CF system
— IBM Channel S/370 Interface
— TCP/IP Ethernet 1 Gigabit
— TCP/IP Token Ring
— TCP/IP Ethernet 10/100
Supported Environments and Emulations
DocuPrint 525/1050:
• IBM AFP via PSF™/MVS
®
, PSF/VM™,
PSF/VSE™, PSF 400
®
, PSF/AIX
®
, PSF/OS/2
®
InfoPrint Manager for AIX
®
, InfoPrint Manager
for Windows NT™ and Windows 2000™
• Native IPDS (all AFP towers supported)
— IBM 3052-1
— IBM 3800-3
— IBM 3800-E (enhanced)
— OCE E-mode
• Optional data-stream support:
— Xerox LCDS, PS, AFP via EOMS V-Services*
— PS, PCL, TIFF, PDF, ASCII via DocuSP
®
• DocuPrint 525/1050 MX
— IPDS and LCDS only
* Via third-party solution
Paper Input and Output
• Up to 16"/406 mm high stack of fanfold
(i.e., 4000 sheets of 28 lbs/105 gsm) with
optional internal stacker
• Input: Support for external third-party
unwinder solutions
• Output: Support for external third-party
finishing solutions
• MICR output supported for internal
stacker (optional)
• Input resolution supported:
— 240 x 240 dots per inch
— 300 x 300 dots per inch
— 600 x 600 dots per inch
• Print resolution switchable between:
— 240 x 240 dots per inch
— 300 x 300 dots per inch
— 600 x 600 dots per inch
•
Paper Formats
— Width (pinfed): 8.3"–19.5"/211 mm–495 mm
— Width (pinless): 8.0"–19.5"/203 mm–495 mm
— Length 7"–14"/178 mm–356 mm by increments
of .33" and .5" (with internal stacker)
— Length 5.83"–22" (target 28”) by increments of .167"
(with post-processing equipment)
— MICR supports pin-fed stock only
•
Printable Area
— Width (pinfed): 18.5"/470 mm maximum
(high quality); 19.0"/483 mm maximum (including
the Mark Print Quality Area)
— Width (pinless): 19.5"/495 mm maximum
(high quality); 19.0"/483 mm maximum
(including the Mark Print Quality Area)
— Length (standard): 7"–14"/178 mm–356 mm
— Length (with external output): up to 17"/432 mm
•
Weight
— 16 lbs–28 lbs/60 gsm–105 gsm
Xerox DocuPrint
®
525 (Simplex)
Physical Characteristics (per engine) and Configuration Options
Print Speed* One-up Two-up One-up Two-up Three-up
(up to): (8.5” x 11") (8.5” x 11") (A4) (A4) (6” x 9")
Landscape Portrait Landscape Portrait Portrait
• High 345 532 354 501 976
• Low 275 425 283 400 780
*Page sides per minute
Duplex Print Speed* One-up Two-up One-up Two-up Three-up
(up to): (8.5” x 11") (8.5” x 11") (A4) (A4) (6” x 9")
Landscape Portrait Landscape Portrait Portrait
• High 689 1064 708 1002 1952
• Low 551 852 566 801 1560
* Page sides per minute; DP1050 simplex speed equals half of values shown
Mode Speed Simplex Duplex
Pinfed High 60–127 gsm (16–34 lbs) 60–127 gsm (16–34 lbs)
Low 60–160 gsm (16–42 lbs) 60–127 gsm (16–34 lbs)
Pinless High/Low 60–105 gsm (16–28 lbs) 60–105 gsm (16–28 lbs)
Paper Weights
Environmental/Electrical Requirements
• Operating temperature: 16° C–28° C
or 60.8° F–82.4° F
• Recommended relative humidity: 20%
to 80% (without condensation)
• Heat Dissipation: 13,000 Kcal/hr
(51,310 BTU/hr)
• Noise output: Max 90dBA
• US Version: 208/220/230/240 Volts
+10%, –5%
• EU Version: 380/400/415 Volts
+10%, –5%
• Power Consumption:
— Operating: 17.5 KVA (Average)
for 28 lb/105 gsm paper
— 11.5 KVA (Average) for
17 lb/64 gsm Paper
— Standby: 3.5 KVA (Average)
without the controller
— PLB: 4W per box
• US Version:
— EMI: FCC Part 15 class A
— Safety: UL 1950/CSA C22.2
No. 950
• EU Version:
— EMI: EN55022 class A
— Safety: EN60950/EN60825
• Stampa Controller
— Xeon Processor, 3.0 Ghz
processor speed
• Stampa Connectivity
— Standard = Duplex Gigabit,
TCP/IP Link A 100 Mbits/
1 Gigabit
© 2005 Xerox Corporation. All rights reserved. Xerox® and DocuPrint® are trademarks of Xerox Corporation. Product appearance, build status and/or specifications are subject
to change without notice. The Xerox Total Satisfaction Guarantee applies to equipment under a Xerox warranty or Xerox Maintenance Agreement and is subject to certain restrictions.
In support of Xerox’s environmental leadership goals, this product may contain some recycled components that are reconditioned. Printed in U.S.A. 8/05 610P719370 A
Xerox DocuPrint
®
1050 (Duplex)
 previous