Xerox 90 Copier User Manual


 
dc04cc0332
Customer Support Page 4
Feature Implementation Values
Media Color <</MediaColor (string)>> setpagedevice Where value is one of the following:
Yellow, Green, Buff, White, Red, Ivory, Gray,
Clear, Pink, Goldenrod, Orange, Blue, Other,
Unspecified, Custom1 – Custom7.
NOTE: Use this command in conjunction
with the commands Media Size and Media
Type.
Media Source <</MediaPosition int>> setpagedevice Where int is one of the following:
1 = Tray 1
2 = Tray 2
3 = Tray 3
4 = Tray 4
5 = Bypass Tray (SMH)
6 = High Capacity Feeder
NOTE: See the media selection comments
in the Dependencies / Caveats section.
Output Location << /OutputType (value) >> setpagedevice
OR
%%OID_ATT_OUTPUT_BINS value
Where value is one of the following:
TopTray
MainTray
Where value is one of the following:
OID_VAL_OUTPUT_BIN_TOP or
OID_VAL_OUTPUT_BIN_MAIN
Stapling <</Staple int >>setpagedevice
<</StapleDetails<</Type1/StapleLocation
(string)>>
>>setpagedevice
Where int is one of the following:
0 = No Staple
3 = Staple when set is complete
Where string is one of the following three
values:
SinglePortrait (The WorkCentre Pro
65/75/90 uses the staple head at the front of
the WorkCentre Pro 65/75/90 - Staple Head
1).
SingleLandscape (The WorkCentre Pro
65/75/90 uses the staple head at the back of
the WorkCentre Pro 65/75/90 - Staple Head
2).
DualLandscape
Collation <</Collate value>> setpagedevice Where value is one of the following:
true = Collated
false = Uncollated
Resolution
600 x 600 x 1
1200 x 1200 x 1
1800 x 1800 x 1
600 x 600 x 2
<</DeviceRenderingInfo
<< /Type 4 /ValuesPerColorComponent 2 >>
/HWResolution [x y]>> setpagedevice
<</DeviceRenderingInfo
<< /Type 4 /ValuesPerColorComponent 4 >>
/HWResolution [x y]>> setpagedevice
Where x and y are one of the following:
1200 1200
1800 1800
600 600
Quantity <</NumCopies int>>setpagedevice
OR
%% OID_ATT_COPY_COUNT value
Where int or value is 1 to 9999
Simplex <</Duplex value>> setpagedevice Where value is false
Duplex Long Edge
Binding
<</Duplex true /Tumble value>>
setpagedevice
Where value is false
Duplex Short Edge
Binding
<</Duplex true /Tumble value>>
setpagedevice
Where value is true