Filter
Top Products
3M™ Overhead Projector 9000 Series Illustrated Parts Breakdown
© 3M IPC 2001 40
Section 13.
Lamp Changer & Hi/Lo Lamp Control Module
(Dual Lamp Versions) Parts List
Item
No.
3M
Part Number
Description Qty.
12B 78-8073-3012-7 COVER, Resistor, 20W, ENX 1
13A 78-8079-8881-7 LEVER, Lamp Changer, ENX/FXL 1
13B 78-8079-8987-2 LEVER, Lamp Changer, EVD/FNT 1
14 Not Available SPRING (Used on 9000 Series serial no. 842643 and earlier) 1
15 78-8079-8882-5 LEVER, Switch, Lamp Hi/Lo, Intensity 1
16 12-7995-0850-7 SPRING 1
17 (See Note 1) WASHER, Lamp Changer (9080, Qty 1) 2
18A 78-8079-8885-8 BRACKET, Lamp Changer
(Used on 9000 Series serial no. 842643 and earlier)
(Used on 9550 serial number 823581 and earlier)
1
18B 78-8073-2961-6 BRACKET, Lamp Changer
(Used on 9000 Series serial no. 842644 and up)
(Used on 9550 serial no. 823582 and up) (9400 - all versions)
1
19 (See Note 1) SCREW, Taptite, 4-24 X 3/4 2
20A 78-8079-8889-0 PCB ASSEMBLY, Lamp Changer (Used on 9550 serial
number 823581 and earlier) (Not used on 9400)
1
20B 78-8073-3105-9 PCB ASSEMBLY, Lamp Changer
(Used on 9550 serial no. 823582 and up) (Not used on 9400)
1
21 78-8095-8339-2 TAPE, Heat Shield, EVD 1
22A 78-8073-2969-9 SWITCH, Hi/Low (9080 AADT, AHDG, 9085 U.S., plus
AAWB, 9100 Articulate Doublet Head, 9200 Open Triplet
Head)
1
22B 78-8073-2970-7 SWITCH, Hi/Low, EVD
(9400 AHRG, AHRS, AHRU, AHRZ, 9550)
1
23 (See Note 1) SCREW, Plastite, 4-20 X 3/8 BZN 1
Note 1: Order the 9000 Series Hardware Repair Kit (78-8054-1818-9). This kit contains a complete set of
hardware for the 9000 Series O.H.P. *For Europe only, see Sections 16, 17, 18, and 19 for Parts Kits.