Xerox 9200 Projector User Manual


 
3M™ Overhead Projector 9000 Series Illustrated Parts Breakdown
© 3M IPC 2001 39
Section 13.
Lamp Changer & Hi/Lo Lamp Control Module
(Dual Lamp Versions) Parts List
Item
No.
3M
Part Number
Description Qty.
0A 78-8079-9147-2 LAMP CHANGER and Hi/Lo Control Module, ENX
(Complete Assembly) (Used on 9000 Series serial no. 842643
and earlier)
1
0B 78-8079-9149-8 LAMP CHANGER and Hi/Lo Control Module, EVD
(Complete assembly) (Used on 9000 Series serial no. 842643
and earlier) (Used on 9550 serial number 823581 and
earlier)
1
0C 78-8079-9148-0 LAMP CHANGER and Hi/Lo Control Module, FNT
(Complete assembly) (Used on 9000 Series serial no. 842643
and earlier)
1
1 (See Note 1) SCREW, Taptite, M3.5 X 6 3
2A 78-8079-8933-6 THERMOSTAT
(9080/ENX, 9100/ENX, 9200/ENX, 9400, 9550)
1
2B 78-8079-9010-2 THERMOSTAT, Safety
(9050/FNT, 9080/FNT, 9100/FNT, 9200/FNT)
1
3 (See Note 1) SCREW, Plastite, 6-19 X 5/16 1
4 78-8079-8886-6 ADAPTER, Switch, Interlock 1
5 Not Available SWITCH, Micro 1
6 (See Note 1) SCREW, Taptite, M3 X 12 2
7 (See Note 1) SCREW, Type BT, 4-24 X 5/8 2
8 78-8079-8855-1 SWITCH, Lampchanger/Hi/Lo, Dimmer 2
9A 78-8079-8880-9 KNOB, Lamp Changer/Hi/Lo Lamp (Some 9080 versions,
Qty. 1) (Used on 9000 series serial no. 842643 and earlier)
(Used on 9550 serial number 823581 and earlier)
2
9B 78-8073-2962-4 KNOB, Lamp Changer (Used on 9000 Series serial no.
842644 and up) (Used on 9550 serial no. 823582 and up)
(9400 - all versions)
1
10A 78-8079-8879-1 HOUSING, Control, 2 Hole (9100, 9200)
(Used on 9000 Series serial no. 842643 and earlier)
(Used on 9550 serial number 823581 and earlier)
1
10B 78-8079-8965-8 HOUSING, Control, 1 Hole (9080 Brazil kit) 1
10C 78-8073-2954-1 HOUSING, Lamp Changer (Used on 9550 serial no. 823582
and up) (9400 - all versions)
1
11A 78-8073-7127-9 RESISTOR, 1.2 Ohm (9080, 9100, 9200 ENX versions) 1
11B 78-8079-9196-9 RESISTOR, .11 Ohm
(9080 AADT, AHDG, 9100 AABT and 9200 AACT)
1
12A 78-8073-2987-1 COVER, Resistor, 20W, FXL 1