Xerox C65 Copier User Manual


 
Secure Installation and Operation of
Your CopyCentre
TM
C65/C75/C90 or
WorkCentre
TM
Pro 65/75/90
Document version 1.3
Last revised: 12/20/04
© 2004 Xerox Corporation. All rights reserved. Page 3 of 4
6. A reboot of the system software for a WorkCentre™ Pro 65/75/90 Advanced Multifunction System machine is
necessary before a change made to the System Administrator password from the Local User Interface will be
synced with and accepted by the Web User Interface. Until this system software reboot occurs, system administrator
functions from the Web User Interface should not be accessed.
7. Caution: A CopyCentre™ C65/C75/C90 Copier or WorkCentre™ Pro 65/75/90 Advanced Multifunction System
allows an authenticated System Administrator to disable functions like Image Overwrite Security that are necessary
for secure operation. System Administrators are advised to periodically review the configuration of all installed
machines in their environment to verify that the proper secure configuration is maintained.
8. If the CopyCentre™ C65/C75/C90 Copier or WorkCentre™ Pro 65/75/90 Advanced Multifunction System has the
external removable hard disk drive cabinet option, it is recommended that when a disk drive is inserted into the
cabinet on the machine the applicable drive bay in the external cabinet be secured by the barrel lock. It is further
recommended that when the disk drives are physically removed from the machine they either be stored in a GSA-
approved security container conforming to National Industrial Security Program (NISP) requirements. Otherwise, the
machine should be contained in a closed area.
9. The following pages are available from the Web User Interface to the WorkCentre™ Pro 65/75/90 Advanced
Multifunction System with System Administrator login and authentication. These pages provide standard system
configuration capability:
Image Settings - Allows the setting of what TIFF JPEG Compression version to use. Is accessible by selecting
the Image Settings tab from the Properties Content menu.
Parallel - Allows enabling and setting the timer for the Parallel Port. Is accessible by selecting the General
Setup Æ Connectivity Æ Physical Connections Æ Parallel tab from the Properties Content menu.
Fax - Allows the review and changing of the settings for submitting a Network Fax job from a user’s client. Is
accessible by selecting the General Setup Æ Services Æ FAX Æ General tab from the Properties Content
menu.
Internet Receive Settings – Allows configuration of the various options for inbound Internet messaging. Is
accessible by selecting the General Setup
Æ Services Æ Internet Messaging Æ Internet Receive Settings
tab from the Properties Content menu.