Filter
Top Products
Error Messages
Xerox FS 5250, User’s Guide
- 81 -
THERE IS NO SPACE LEFT
IN THE DYNAMIC AREA
THE USER ADDRESS STRING IS TOO LONG
TERMINATOR NOT ACCEPTED
ESC Z IS WRONG
Validation value in NVRAM is wrong
YOU CANNOT LOCK THE NVRAM
BEFORE YOU HAVE PROGRAMMED IT
14.2. Non-Recoverable Hardware Errors
The following recovery attempt can be made:
• Turn power OFF for 10 seconds and then ON again. If the problem
persists, seek technical assistance.
CODE ERROR TYPE CODE DESCRIPTION
5002 HARDWARE ERROR Hardware ERROR in
NVRAM
5005 NVRAM ERROR NVRAM verification
ERROR in cell
6001 HARDWARE ERROR check sum ERROR
7001 HARDWARE ERROR Main processor RAM
ERROR
8001 HARDWARE ERROR Line interface RAM error
8002 HARDWARE ERROR Wrong data in selftest
8003 HARDWARE ERROR Wrong word in selftest
8004 HARDWARE ERROR Response missing from
TWINAX interface
8005 HARDWARE ERROR Wrong interrupt from
TWINAX interface
8006 HARDWARE ERROR No test response from
TWINAX interface
8007 HARDWARE ERROR Invalid test response from
TWINAX interface
8010 HARDWARE ERROR Nothing received in self-
test