Xerox M20I Printer User Manual


 
3
EVALUATOR GUIDE FOR COPYCENTRE C20 / WORKCENTRE M20 / WORKCENTRE M20i
Exceptional features available for the first time at this price:
• Increased Speed - 22ppm (letter), 21 ppm (A4)
• Full Duplex - two-sided input & output capability (Copy and Print) standard
*JBIG = “Joint Bi-level Image experts Group” is a new compression standard which provides an improvement of 20 to 80% over
previous compression techniques.
**LDAP = “Lightweight Directory Application Protocol” applies to company/corporate internal email address lists. It is a standard
protocol utilized within most company /corporate email servers. LDAP provides for searching of company/corporate network
email address information from mail servers to make it easier to find email addresses from corporate address books without
requiring end users to have to enter “full” addresses via keyboard entry.
CopyCentre C20
Copy Only
Standard Configuration Includes:
• 22 ppm Letter / 21 ppm A4
• First Copy Out Time < 8 sec.
• One 550-sheet paper tray
• One 100-sheet bypass tray
• 250-sheet output tray
• 50-sheet DADF is standard
Optional Accessories include:
• 2nd Paper Tray – 550 sheets
• Foreign Device Interface Kit
to provide connectivity to
external third party control
devices (e.g. vend stations,
and accounting terminals)
• Cabinet Stand
WorkCentre M20
Copy/Print/Scan
Standard Configuration Includes:
• 22 ppm Letter / 21 ppm A4
• First Copy Out Time < 8 sec.
• First Print Out Time < 9 sec.
• One 550-sheet paper tray
• One 100-sheet bypass tray
• 250-sheet output tray
• 50-sheet DADF is standard
• Direct connect printing (PCL 6 Driver)
• Direct connect scanning (TWAIN
Driver)
• Scansoft PaperPort SE v9.0 and
OmniPage SE v2.0 software
(1 user license)
Optional Accessories include:
• Network Accessory Kit: Provides
Ethernet network interface card,
Adds Postscript 3 printing support,
32MB memory for e-mail support,
E-mail keyboard, Documentation,
Software CD and Solutions CD
(web management tools)
• 2nd Paper Tray – 550 sheets
• Secure Print and Network
Authentication Kit: adds 96 MB
memory, secure print drivers,
applicable software and documentation
(requires Network Accessory kit)
• Foreign Device Interface Kit to provide
connectivity to external third party
control devices (e.g. vend stations,
and accounting terminals)
• Cabinet Stand
WorkCentre M20i
Copy/Print/Scan/Fax/Email
Standard Configuration Includes:
• 22 ppm Letter / 21 ppm A4
• First Copy Out Time < 8 sec.
• First Print Out Time < 9 sec.
• One 550-sheet paper tray
• One 100-sheet bypass tray
• 250-sheet output tray
• 50-sheet DADF is standard
• Direct connect printing (PCL 6 Driver)
• Integrated network connectivity –
10Base T connectivity port embedded
in machine
• Postscript 3 standard
• Integrated Ethernet network interface;
Postscript 3 driver; and Solutions CD
(web management tools)
• CentreWare device management
capability including CentreWare Web,
CentreWare Internet Services,
CentreWare DP, Novell NDPS,
and HP HPOpenview
• Fax-33.6Kbps modem with JBIG*
compression on the M20i
• Superior fax features including mail-
boxes, forwarding features to an email
address or another fax number
• Scan-to-email with LDAP**
capabilities
• Direct connect scanning
(TWAIN Driver)
• Scansoft PaperPort SE v9.0 and
OmniPage SE v2.0 software
(1 user license)
Optional Accessories include:
• 2nd Paper Tray – 550 sheets
• Secure Print and Network
Authentication Kit: adds 96 MB
memory, secure print drivers,
applicable software and documentation
• Foreign Device Interface Kit to provide
connectivity to external third party
control devices (e.g. vend stations,
and accounting terminals)
• Cabinet Stand
Configurations and Options
There are three standard configurations