Filter
Top Products
S
ETTING
U
P
Y
OUR
P
RINTER
1.14
For Network Printing
(WorkCentre PE120i only)
You can attach your machine to a network using an Ethernet
cable (UTP cable with RJ.45 connector).
The WorkCentre PE120i has a built-in network interface card.
1
Make sure that both the machine and the computer are
turned off.
2
Plug one end of the Ethernet cable into the Ethernet
network port on your machine.
3
Plug the other end of the cable into a network LAN
connection.
N
OTE
:
After connecting the machine, you need to configure the
network parameters on the control panel. See your machine’s
System Administration Guide.