Filter
Top Products
701P47920
November 2007
Page 2 of 2
8. At the Choose Shortcut Folder, make your selection. If you want to place an icon on the desktop, make sure you
have selected [Create Icons for All Users]. Select [Next].
9. At the Pre-Installation Summary window, make sure the information displayed accurately reflects your choices. If
the information is correct, select [Install]. The installation process begins.
10. At the Install Complete window, select [Done]. You are now ready to begin using Remote Print Server software.
11. Eject the CD-ROM.
To install the Remote Print Server on a Sun/Solaris platform
1. Insert the FreeFlow Remote Print Server CD-ROM into your CD-ROM drive. If the CD-ROM displays a File
Manager window, close the File Manager window.
2. Open a Terminal window. Right-click on the desktop and select [Tools: Terminal].
3. Log in with the user account that will be running the FreeFlow Remote Print Server software. The software can
only be run under the account used during the installation. You do not have to log in as root to install the
software.
4. At the prompt, type /cdrom/cdrom0/Disk1/InstData/Solaris/VM/install.bin .
5. Press <Enter>. The script will run.
6. At the Introduction window, select [Next].
7. At the License Agreement window, accept the terms of the license agreement and select [Next].
8. At the Choose Install Set window, make sure all boxes are checked and select [Next].
NOTE: If your system is only connecting to one version of a DocuSP / FreeFlow Print Server system, only check
the necessary box. Check all applicable boxes if you have a mixed DocuSP / FreeFlow environment.
9. At the Choose Install Folder window, select [Next] to install to the default folder.
10. At the Choose Link Folder, select your choice and select [Next].
11. At the Pre-Installation Summary window, make sure the information displayed accurately reflects your choices.
Check that the available memory is more than what is required for the installation. If the information is correct,
select [Install]. The installation process begins.
12. At the Installation Complete window, select [Done]. You are now ready to begin using the Remote Print Server.
13. Eject the CD-ROM by typing eject cdrom and pressing <Enter> in the terminal window.
Getting started - Windows
1. Open the FreeFlow Remote Print Server software.
2. Select [Printer] and then [Add printer…].
3. Enter the printer host name or IP address.
4. Select [Find Name] or enter the name of the printer to be displayed on the Remote Print Server interface.
5. Select [OK].
6. For further information on this and adding printers using discovery, select [Help].
Getting started – Solaris
1. Open a Terminal window.
2. At the prompt, type FreeFlow_Remote_Print_Server and press <Enter>.
3. Enter the printer host name or IP address.
4. Enter the name of the printer to be displayed on the Remote Print Server interface.
5. Select [OK].
6. For further information, select [Help].