Xerox PRO 35 All in One Printer User Manual


  Open as PDF
of 3
 
Secure Installation and Operation of
Your WorkCentre
TM
M35/M45/M55 or
WorkCentre
TM
Pro 35/45/55
Document version 1.13
Last revised: 12/20/04
© 2004 Xerox Corporation. All rights reserved. Page 3 of 3
7. A reboot of the system software for a WorkCentre™ M35/M45/M55 Copier-Printer or WorkCentre™ Pro 35/45/55
Advanced Multifunction System machine is necessary before a change made to the System Administrator password
from the Local User Interface will be synced with and accepted by the Web User Interface. Until this system
software reboot occurs, System Administrator functions from the Web User Interface should not be accessed.
8. Caution: A WorkCentre™ M35/M45/M55 Copier-Printer or WorkCentre™ Pro 35/45/55 Advanced Multifunction
System allows an authenticated System Administrator to disable functions like Image Overwrite Security that are
necessary for secure operation. System Administrators are advised to periodically review the configuration of all
installed machines in their environment to verify that the proper secure configuration is maintained.
9. The following Special Purpose pages are available from the Web User Interface with System Administrator login and
authentication: These pages provide additional system configuration capability
• Exported Scan Files - Allows the setting of the PDF encoding format for scanned files. Is accessible by typing
http://{IP Address}
3
/diagnostics/index.dhtml and then selecting ‘Exported Scan Files’ from the Diagnostics
Content Menu.
• Raw TCP/IP Printing - Allows the user to enable/disable and modify several attributes for Raw TCP/IP Printing.
Is accessible by typing http://{IP Address}
/diagnostics/index.dhtml and then selecting ‘Raw TCP/IP Printing’
from the Diagnostics Content Menu.
• LPR/LPD - Allows the user to enable or disable PDL switching over LPR/LPD. Is accessible by typing http://{IP
Address}
/diagnostics/ lprlpdhidden.dhtml.
• This item is deleted.
SC Log - Displays a read-only list of the last 50 entries in the Network Controller System
Control (SC) log. Is accessible by typing http://{IP Address}/diagnostics/ sclog.dhtml.
• Secure Print Release All - Allows the user to release all of the user’s secure print jobs at one time with the
same user name and password. Is accessible by typing http://{IP Address}
/diagnostics/
secureReleaseAll.dhtml.
• Secure Attribute Editor - Allows the user to change some system attributes related to PDLs (e.g., memory
usage, copies per page, etc.). Is accessible by typing http://{IP Address}
/diagnostics/ secureattr.dhtml.
• Sever Fax Edge Erase - Allows the user to set the desired border edge erase value for a Server Fax job. Is
accessible by typing http://{IP Address}
/diagnostics/index.dhtml and then selecting ‘Server Fax Edge
Erase’ from the Diagnostics Content Menu or by typing
http://{IP Address}/diagnostics/serverfaxedgeerase.dhtml.
Contact
For additional information or clarification on any of the product information given here, contact Xerox support.
Disclaimer
The information provided in this Xerox Product Response is provided "as is" without warranty of any kind. Xerox Corporation disclaims all warranties,
either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Xerox Corporation be liable
for any damages whatsoever resulting from user's use or disregard of the information provided in this Xerox Product Response including direct,
indirect, incidental, consequential, loss of business profits or special damages, even if Xerox Corporation has been advised of the possibility of such
damages. Some states do no allow the exclusion or limitation of liability for consequential damages so the foregoing limitation may not apply.
3
{IP Address} is the IP address of the machine
 previous