Filter
Top Products
SquareFold Trimmer User Guide
4
Overview
1a.
1b.
1c.
1d.
1.
2.
2a.
2b.
2c.
2d.
3.
3a.
3b.
3c.
3d.
The Control Panel consists of the following:
Fault indicators: These indicators light when a fault or jam
occurs in either a particular area of the SquareFold Trimmer
Module or in the finisher:
Control panel
This indicator lights when a jam occurs as the booklet is
leaving the exit area of the finisher.
This indicator lights when a jam occurs in the square
fold area.
This indicator lights when a jam occurs in the trimmer
area.
This indicator lights when the Trimmer Waste Container
is pulled out or when it is full.
Trimmer functions: This area of the control panel contains
the following:
2.
1.
1b.
1c.
1d.
Trimmer power indicator: This lights when the Trimmer
Mode is on.
Trimmer on/off button: Press this button to switch
on/off the Trimmer Mode.
2a.
2b.
Tip: If one of these indicators (1a, 1b, 1c) is lit, the top
covers can be opened, and the jam/fault cleared; otherwise,
during normal operation or when the machine is idle, the top
covers cannot be opened. For information on jam/fault
clearance, refer to page 12.
1a.