Xerox WorkCentre Pro 175 All in One Printer User Manual


 
All measurements were made on products performing within established operating specifications and received
recommended maintenance procedures. Xerox certifies that this product meets or exceeds the applicable standards for
safety and emissions.
www.xerox.com
Reference “About Xerox”
Product: CopyCentre C165 / C175 PSDS No: 0955
WorkCentre M165 / M175
WorkCentre Pro 165 / 175
Section V - Emission/Exposure Information*
Light Sources FDA Accession#
Class 1 Laser Product containing an 0120666-01
embedded Class 3B laser
Electromagnetic Emissions
US FCC: Class A
Canada DOC: Class A
Audible Noise TLV
Platen Copy/Catch tray/Simplex
65 ipi 75ipi
Run 72 71 85.0 dB(A)
Standby 48 49
Impulse 75 74
Fully Configured
65ipi 75ipi
Run 77 77
Standby 49 49
Impulse 81 82
VOC’s
Insignificant quantities detected
(<0.1ppm) during 1 hour of
continuous operation
Ozone TLV
0.01mg/m3 0.1 ppm
Total Dust TLV
0.04mg/m
3
10 mg/m
3
Section VI - Product Recycling and Disposal
Xerox operates a worldwide equipment takeback and reuse/recycle program. Contact your Xerox
sales representative (1-800-ASK-XEROX) to determine whether this Xerox product is part of the
program. For more information about Xerox environmental programs, visit
www.xerox.com/environment
.
If you are managing the disposal of your Xerox product, please note that the product contains
lead, mercury and other materials whose disposal may be regulated due to environmental
considerations. The presence of lead and mercury is fully consistent with global regulations
applicable at the time that the product was placed on the market. For recycling and disposal
information, contact your local authorities. In the United States, you may also refer to the
Electronic Industries Alliance web site:
www.eiae.org
."