Filter
Top Products
28
The following is for the XE80 and XE82 machines only.
Problem Suggested Solution
The WorkCentre
does not print.
Use the IEEE-1284 parallel port cable supplied
with the machine.
Check the IEEE-1284 parallel cable connection
at the WorkCentre and the PC.
Check the IEEE-1284 cable with a computer and
printer that work. If printing is still not possible,
replace the cable.
Check that the On-line/Off-line indicator light is
on. If the machine is currently copying, the
machine will print when the current copy job is
finished.
Check the printer settings in the Windows
Control Panel to make sure that the print job is
being sent to the correct port. (For Example:
LPT1.)
Uninstall, then reinstall the WorkCentre printing
software.
Half of the page is
blank.
Reduce the resolution setting from 600 dpi to 300
dpi. Install more RAM into the computer.
Change the page orientation in the printer setup
dialog.
Printing is too slow. Try closing other applications before printing.
Check that the computer meets the minimum
specifications listed in this manual
Reduce the resolution setting from 600 dpi to 300
dpi.
(Windows 3.1x only.) In the options menu of
print manager, remove the check from
background printing.
Incorrect fonts Use the fonts dialog box in the Control Panel to
enable True Type fonts.