Filter
Top Products
Planning for the installation Installation Planning Guide
3-4 DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
• The telephone jack or PhoneShare device must be within the
14 ft. (4.25 m) length of the printer's telephone cord. If a
PhoneShare device is used, it must also be placed within the
25 ft. (7.6 m) length of the telephone cord from the telephone
jack, and within the 6 ft. (1.8 m) length of the power cord from
its assigned power receptacle.
• Call the Xerox Welcome Center and provide the telephone
number of this line for entry into the Sixth Sense on-line
support system. If a PhoneShare device is used, also provide
the port number on the PhoneShare device that the printer is
using.
• One 10BaseT or 100BaseT Ethernet connection for the
controller.
• One telephone line.
Training • Select personnel to train.
• Set up training schedule.
Client
Workstations
Make sure all client workstations that will be submitting print jobs
have the proper hardware, operating system, and networking
software required by the DocuTech/DocuPrint 75/90 and
DocuPrint 75 MX printer as client platforms.
Applications Work with your Xerox Systems Analyst to determine
requirements for initial applications.
Installation planning tasks
To aid you in installation planning, this section provides a list
describing tasks you and your Xerox representative must
complete in the days before scheduling installation. If you have
questions about any of these activities, contact your sales or
service representative.
Before scheduling delivery of the DocuTech /DocuPrint 75/90 system
The following activities should be completed before you
schedule a delivery date for the DocuTech/DocuPrint 75/90 and
DocuPrint 75 MX printers: