Xerox XR3 Series Computer Monitor User Manual


 
Technical Information
24
Xerox© LCD Monitor User’s Manual
Before consulting service personnel, check the following
chart for a possible cause and solution to the trouble you are
experiencing.
Monitor will not turn on
Make sure the power cord is plugged in.
No picture
Make sure the power cord is plugged in.
Check the signal cable connecting the LCD monitor
and the computer (refer to page 12-13).
Press the button on the front panel of the monitor.
Poor picture or abnormal picture
Check the D-SUB cable connecting the LCD monitor
and the computer (refer to page 12-13).
Press the MENU button to adjust the Brightness
Contrast option in the OSD.
Adjust the Color Select option in the OSD.
Press the AUTO button on the front panel of the
monitor, to automatically adjust the display mode.
Out of range message appears
Press the AUTO button on the front panel of the
monitor, to automatically adjust the display mode.
Press the MENU button to adjust the V Position, H
Position and H Size options in the OSD.
If using Windows 9X/2000/XP, wait a few seconds;
once Windows detects the problem, a dialog will
appear allowing you to manually set up the video
mode according to the preset mode timing chart
(refer to page 21).
Troubleshooting