Filter
Top Products
WWW.CABLESUNLIMITED.COM 925-609-7550 PAGE 4
I
NSTALLATION AND
S
ETUP
The initial set up of the Wireless USB adapter
set is a standard Windows installation process,
similar to driver installation of USB devices. It
does not require any technical skills or
understanding of wireless technology, and can
be easily performed with the help of the
“Getting Started” leaflet (on the right). The
entire process setup takes 5-7 minutes.
1. The package includes the two adapters, a
table adapter, CD, and power supply.
2. Enter CD and follow instructions to install
drivers & software.
3. Connect the PC adapter to PC.
4. Perform association (pairing) between the PC
adapter and the device adapter. Pairing is
done for security purposes, and is performed
by attaching both adapters simultaneously to
the PC. After a few seconds a message is
displayed that pairing is complete.
5. Remove the device adapter from the PC and
place it in the table adapter.
6. Attach a USB cable to connect a USB device
(e.g, printer, hard disk drive) to the table
adapter.
7. Connect the power supply to the table
adapter.
8. Wireless USB communication is enabled and
the PC can communicate with the USB device.