Filter
Top Products
Cartridge Replacement
To Install New Cartridges To Install Part-used Cartridges
Position cartridge leader
between the rubber rollers in
dispenser.
Turn handle clockwise to
advance film
Insert new supply cartridge.
Continue to turn
handle until film is
aligned and wrinkle-
free.
Install feed tray
and trim off
excess film
using cut blade.
Attach reusable cartridge
starter tool to partially
used supply cartridge.
Insert partially used
supply
cartridge
into
dispenser.
Note:
tool
should be
positioned
between rubber
rollers in dispenser.
Turn handle clockwise until tool has exited
dispenser and film is aligned and wrinkle-free.
Store reusable
cartridge starter
tool for later use.
Install feed tray
and trim off
excess film
using cut blade.
Remove used
supply cartridge by
pulling outward. If
there is film
between the
rollers, turn handle
counter-clockwise.
GB
Remove feed tray by
lifting upward and
gently pulling
away from
dispenser.