Filter
Top Products
5 6
(fig.1)
(fig.2)
(fig.3)
(fig.4)
(fig.5)
(fig.7)
(fig.6)
(fig.8)
Composing Messages
• Insert a Font Disc (if a different
Font is desired) as shown. (fig.1)
• Type in words or phrases.
• Select a size. (fig.2)
• Insert a Blank Disc. (fig.3)
• Press the save button. (fig.4)
Printing (con’t)
• Keep the green button pressed and
move the Xyron® Design Runner™ to the
right until printing is complete.
Erasing
• Insert a Blank Disc into the Blank Disc
Slot. Scroll through the content on the
disc by simultaneously pressing and
holding the Shift button and Left or
Right Arrow buttons to make sure you
want to delete the content on the disc.
• To erase the last saved message on a
Blank Disc, press the Shift button and
the Delete button at the same time and
hold for 3 seconds (fig.7)
• To erase all content on a disc, press the
Purple, Green and Delete buttons at
the same time and hold for 3 seconds. (fig.8)
Printing
• After saving text to a Blank Disc,
remove the Blank Disc from the Xyron®
Design Disc™ Maker and insert it
into the Xyron® Design Runner™. (fig.5)
• Scroll to the image you want to print -
the images are numbered in the order
that you saved them.
• Place the white ‘+’ on the right side of
the Design Runner on the project
where you want to begin printing. (fig.6)
• Press and hold the green button.
• Wait for the ‘P’ to appear on the bottom
left of the LCD screen.
TO DELETE LAST
MSG, KEEP PRESSED
TO DELETE DISC
KEEP PRESSED