Filter
Top Products
R Remote Operation Manual 3
■ System Requirements
In order to use R Remote, you'll need the following items.
● A Windows computer equipped with the following conditions:
OS
Windows 7 SP1 Home Premium or later, Windows 8, Windows 8.1
CPU
Intel Core i3/i5 or higher
HDD
120MB or more
Connector
An Ethernet connector (1000BASE-T or higher recommended.)
Others Dante Controller and Bonjour must be installed
(*)
(*)Download the Dante Controller and Bonjour from the following URL:
http://www.yamahaproaudio.com/
● Ethernet cable (CAT5e or better)
● Network switch (with gigabit Ethernet support)
● R series units (up to 8 units) with firmware V1.70 or later
The Ro8-D is also displayed, but its settings cannot be edited.
Since this will impose a network load, we
recommend that you use the "R Series Information" dialog box to set the connection status to Disconnect.
■ Setup
The setup workflow is shown below.
Installing the R Remote
↓
Settings on the R series units
↓
Connect the computer and R series units
↓
Power-on the R series units
↓
Accessing the Control Panel
↓
TCP/IP Settings
↓
Use Dante Controller or the CL series console to specify the routing