Filter
Top Products
Doc# 27-0032UM Rev A Issued 07/05
6
Required Tools
• Phillips screwdriver, 2 pt.
• 5/16 wrench
NOTE: For the fastest and easiest
installation of the Command
Console, follow these steps
in the sequence they are
presented.
Preparations
In preparation to install the Command
Console, take the following precautionary
steps:
Verify the Command Console power
switch is OFF.
Do not connect or disconnect the unit dur-
ing an electrical storm.
The power cord plug must be connected to
a properly grounded power outlet.
Any equipment to which the unit will be at-
tached must also be connected to properly
wired and grounded power outlets.
Ensure all of the following parts are in-
cluded in the package received from Z Mi-
crosystems. Verify all parts have not been
damaged during shipment. If any of the
parts are missing or damaged, immediately
contact Z Microsystems Customer Service
at 858-657-1000.
• Command Console unit
attached to the mounting
plate
• Power Cable
• User Manual
• Video Cable
• Serial Cable
• Rack-mounting hardware
Remember to save the unit’s original
shipping materials. It may be necessary to
move the unit at a later date.
SHIPMENT CONTENTS
INSTALLATION