Filter
Top Products
DHCP Server
Under the router mode, the ZMAX-8210 can also serve as a DHCP server, responsible for assigning IP
addresses to the devices connected to the infrastructure.
From the“IP Settings”choose“Router”. The way to assign IP Address turns “Static IP to “DHCP
Server”. Clicking“Apply”to enable “DHCP Server”.
Figure 15 DHCP server
Note：
The IP Address number that the “DHCP Server” generates shall be no less than the
ones in clients
Time Server
Compliant with NTP, the ZMAX-8210 is capable of keep its time in complete accord with the internet
time.
Opening“Basic Settings”guides you to the time setup.
Figure 16 Time Server
Time Server Setup：
Assign the proper IP address to the ZMAX-8210, ensuring this CPE to have access to the
internet. For information on setting proper address, refer to IP Address.
From the“Time Server”，enter the correct time server. The following provides the time server
website.
a) time.windows.com
b) time-a.nist.gov
c) time.nist.gov
From the“Time Server”pop-menu, select your time zone.
Chapter 4
Advanced Configuration - 17 -