Filter
Top Products
7
3. Load ribbon onto the supply spindle
(under print head carriage) and empty
core (with tape attached) onto the take-
up spindle. Make sure the ribbon comes
off the top of the supply spindle and feeds
to the top of the take-up spindle.
4. Push down on the Print Head Lock Le-
ver until an audible 'click' signals the
locked-down position.
Please note that the ribbon automatically synchro-
nises whenever the print head lock down occurs.
5. Close Cover.
SUPPLY SPINDLE
TAKE UP SPINDLE
`CLICK'
OPERATION
The card flipper will not operate and an error will
be indicated if you try to flip a card when the cover
is open.