Filter
Top Products
CANCEL Key Self Test
This self test prints the printer’s
configuration parameters that are
currently stored in Configuration
(EEPROM) Memory. See Figure 27.
The configuration may be changed
either temporarily (for specific label
formats or ribbon and label stock), or
permanently (by saving the new
parameters in memory.) Saving new
parameters occurs whenever a Printer
Configuration procedure is performed.
See Chapter 1 for more information.
PAUSE Key Self Test
This self test can be used to provide the
test labels required when making
adjustments to the Printer’s Mechanical
Assemblies. These test labels can also
be used during the Configuration Mode
Adjustments described in Chapter 1.
See Figure 28.
This self test consists of four individual
test features.
The initial self test prints 15 labels at
speed “ A” then automatically pauses
the printer. Each time the PAUSE key is
pressed, an additional 15 labels will
print, up to a maximum of 9999 labels.
While the printer is paused, pressing the
CANCEL key once alters the self test.
Now each time the PAUSE key is
pressed, the printer prints 15 labels at speed “D” up to a maximum of 9999 labels.
While the printer is paused, pressing the CANCEL key a second time alters the self test
again. Now each time the PAUSE key is pressed, the printer prints 50 labels at speed
“A” up to a maximum of 9999 labels.
While the printer is paused, pressing the CANCEL key alters the self test a third time.
Now each time the PAUSE key is pressed, the printer prints 50 labels at speed “ D” up
to a maximum of 9999 labels.
Figure 27 CANCEL Key Self Test Printout
Troubleshooting and Diagnostics
42