Filter
Top Products
5-28 IMACS System Release 5.1.6 Server Cards
Model No.
Running Head
IPR Card Configuration Screens and Settings IPR Card
5.6.11 Static Routes Configuration Screen
The Static Route Configuration screen, Figure 5-19 displays when pressing “S” (Stat) from
the IP Interface Menu screen. The IP Static information can be added by entering a valid IP
net address (e.g. 125.15.0.0). The IP Static routes will always be used in distance, instead of
the dynamic routes. This distance will be advertised in any routing updates for this static route.
Figure 5-19. IPR 10B2 and 10BT IP Static Routes Configuration Menu Screen
Table 5-9. IPR 10B2 and 10BT IP Static Routes Configuration Table Screen Actions
Action Function
Refresh Refreshes the current screen
Add Adds the selected information on the screen (e.g. IP net, Subnet, etc.)
dElete Deletes the selected information from the screen
pgUp Scrolls up through the list of IP static routes
pgDn Scrolls down through the list of IP static routes
Main Returns to the IP Interface Menu screen