Filter
Top Products
Installing the USB Driver
6211-I2 ADSL2+ Router User’s Guide
19
If the LEDs are illuminated as expected, the router is working properly.
Installing the USB Driver
The following section applies only if you use the USB connector on the
router. If you connect the USB cable between your PC and the router,
Windows detects the new hardware and the Found New Hardware Wizard
appears on your PC monitor. Follow this procedure:
1 Choose "Install from a list or s
pecific location" from the Wizard's menu,
then click on Next.
Figure 4: Found New Hardware Wizard
LAN Solid green to indicate that the device can communicate
with your PC via Ethernet, or flashing when the router is
sending or receiving data over Ethernet.
USB Solid green when connected, flashing when the router is
sending or receiving data.
Table 3: LED Indicators (Sheet 2 of 2)
This LED . . . Should be: