Filter
Top Products
Quick Setup with Auto-Connect Disabled
6212-A2-ZB83-20 6212-I3 4-Port Router User’s Guide
39
Figure 29: Device Setup
9 If desired, configure configure the DSL Router IP address and Subnet
Mask for the LAN interface to correspond to your LAN's IP Subnet. If
you want the DHCP server to automatically assign IP addresses, then
enable the DHCP server and enter the range of IP addresses that the
DHCP server can assign to your computers. Disable the DHCP server if
you would like to manually assign IP addresses.
If you have a second IP address and subnet mask for the LAN interface,
click on the checkbox to configure it.
10 Click on Next to continue. The WAN Setup Summary screen displays all
WAN settings that you have made. Check that the settings are correct
before clicking on the Save / Reboot button. Clicking on Save / Reboot
saves your settings and restarts your router.