Filter
Top Products
Installation
ZX4300P Series User's Guide Page 6
ZX4300P Series LED Reference Key
LED Color Function Power up Display
LNK (0-23) Green ON indicates a link is established
with the corresponding port.
OFF during power up.
ACT (0-23) Yellow Flashing indicates activity on the
channel.
OFF during power up.
SPD100
(0-23)
Green ON indicates the ethernet channel
is successfully linked at 100 Mb/s
OFF during power up. OFF
linked at 10Mb/s
RESET Pressing RESET runs a lamp test to
ensure all switch LEDs are
operating and restarts the adapter.
POWER Green ON indicates the power source is
active.
ON during power up.
REAR
PANEL
Green ON indicates continuity with the
Rear Transition Board
ON during power up, if RTB
installed.
HOTSWAP Blue After the extraction levers are
released (pulled apart), ON
indicates the switch unit is ready to
remove.
During “hot” insertion (system is
active), HotSwap LED is ON and
turns OFF when the switch is
correctly seated.
OFF during power up.