Filter
Top Products
CDMA2000 1X EV-DO Wireless Data Terminal User
Guide
Settings
Click “Options”→”Preference” to enter the settings interface.
Network Connection Settings
Set work mode, etc.
After the setting, click “Apply” button to save the settings on the current interface.
Click “Default” button and then “Apply” button to restore the settings on the current interface to
factory default.
Note:
The default network setup parameters are as below. Different regions may have different
network setup parameters, so please consult your local telecom operator.
Select Alert tone
After clicking “Alerts”, you could set different alert tones.
After the setting, click “Apply” button to save the settings on the current interface.
Click “Default” button and then “Apply” button to restore the settings on the current interface to
factory default.
VPN Settings
VPN Options
None: Do not use VPN.
Microsoft VPN: Use VPN client of Microsoft Windows.
External VPN Application: Use other VPN client application provided another vendor.
Profile (Microsoft VPN only)
Select Microsoft VPN Profile
VPN Application
Specify other VPN client application. To choose the application from your local disk, click “ ”
button.
Click the “Apply “ button.
Optimization Settings
1.You can change settings for network optimization using this feature. you can select “Enable”,
“Disable”.
2.click “Setup” button to setup Optimization Configurations.
Relative Connection Speed: Using this option, you can change image optimization level.
— High: Image optimization level is high. If this level is selected, image quality will be low.
— Medium: Image optimization level is medium.
●
Low: Image optimization level is low. If this level is selected, image quality will be high.
Note:
The data terminal supports 'Optimization' function in Windows system, but not in MAC system.
Miscellaneous
You can select “Ask for confirmation befor deleting” and “Start minimized”.
Click “Lock Code” button to change password.
ZTE Corporation 10 http://www.zte.com.cn