Filter
Top Products
6
If any of these lights are not on, check your connections and
inspect your cables for damage. If the lights are still off,
contact your local vendor.
Internet Setup
You must first prepare your computer / computer network to
connect to the G-470 by setting up your IP address.
1 Click start (Start in Windows 2000/NT) > Settings >
Control Panel.
WLAN The light is on. The device is connected to the
wireless network.
The light is
blinking.
The device is scanning for an
access point (AP).
The light is off. The device is not connected to the
wireless network.
ETHN The light is on. Ethernet is connected.
The light is
blinking
Ethernet is connected, and is
sending or receiving data.
The light is off. Ethernet is not connected.
SYS The light is off. The device is ready.
The light is
blinking orange.
The device is not ready, or is
rebooting.
PWR The light is on. The power is on.
The light is off. The power is off.
Light Description