Filter
Top Products
P-2301/2R-P1C / P-2301RL-P1C User’s Guide
26
The ZyXEL Device automatically restarts. When the POWER
light stops blinking and stays on, follow the directions in
section 4 on page 64.1 to log in to the web configurator again.
However, use the Management IP Address you set up in step
3, instead of http://192.168.1.1. If your computer’s IP address
is in a different subnet, follow the directions in Setting Up Your
Computer’s IP Address on page 31 to change your computer’s
IP address.
5 Making Phone Calls
Use the following sections to make outgoing calls (from a
phone attached to the ZyXEL Device, to another phone) and
incoming calls (from another phone, to a phone connected to
the ZyXEL Device).
5.1 Making Outgoing Calls
Follow these directions to make calls over the Internet.
• If you want to dial a SIP number that only uses numbers (for
example, “12345”), dial the number on your phone’s keypad.
You can also set up a speed-dial entry, if you want, in the
Phone Book > Speed Dial screen.
• If you want to dial a SIP number that uses letters or if you
want to make a peer-to-peer call, set up a speed-dial entry
first. Use the Phone Book > Speed Dial screen. Then, dial
the speed-dial number to make the call.
• If you want to call a PSTN phone over the Internet, follow
your VoIP provider’s instructions.