Filter
Top Products
User's Guide for ZyXEL Omni 56K and Omni 56K Plus Modems
5-25
Command bit dec hex Function and description Ref.
4 16 10 (Work with &D1 command) DTR ON will have the
modem dial the default number and DTR OFF will have
the modem hang-up and reset to profile 0. When the
modem is idle (waiting for command), it will not dial any
number when DTR changes from ON to OFF.
S52= bit dec hex Bit-mapped register. +000
7 0 0 Select ‘ Mark’ as the first signal of the V.23 handshaking
sequence. (Default)
&N12
128 80 Select ‘ Space’ as the first signal of the V.23 handshaking
sequence.
&N12
S56= dec hex +000
0-255 0-FF Hook flash detect time, in units of 10ms,. A value of zero
use country-specific default duration.
S57= bit dec hex Bit-mapped register. +016
4 16 10 Enables the reporting of Class 1 capability in the
response to +FCLASS=?
Table 23. Extended S-Registers "ATSn=x"
Bit S-register bit number, 'b', used in 'ATSr.b=n' and 'ATSr.b=?'
dec Decimal value, 'x', used in 'ATSn=x'
hex Equivalent Hexadecimal value.
+nnn Factory default when listed in 'Reference' column.
Note: 'AT' is omitted when an AT command is referred to in the 'Reference' column..