Filter
Top Products
ES-3100 Series Switch Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
73
3. First of all, please choose the Multicast VLAN ID that we just created
(which is VLAN100). Then give a name to this group, as long as you can
understand. Place the range of Multicast groups here with the start address
and End address. Finally, click “Add” to create this group. (In this scenario,
we use 224.10.10.0 ~ 224.10.10.50)
4. At this point we go back to the “Multicast Setting” page, enable “IGMP
Snooping” here. (Since MVR needs IGMP Snooping). For Unknown
Multicast Frame, we prefer “Drop” here in order to avoid any Multicast