Filter
Top Products
ZyXEL G-270S User’s Guide
Chapter 3 ZyXEL Utility Configuration 47
3 If you select Infrastructure network type in the first screen, select WEP, WPA, WPA2,
WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data
encryption. If you select Ad-Hoc network type in the first screen, you can only use WEP
encryption method. Otherwise, select DISABLE to allow the ZyXEL G-270S to
communicate with the access points or other peer wireless computers without any data
encryption and skip to step 5.
Figure 21 Profile: Security Setting: Encryption Type
4 The screen varies depending on the encryption method you select in the previous screen.
The settings must be exactly the same on the APs or other peer wireless computers as
they are on the ZyXEL G-270S. Refer to Section 3.2.2 on page 38 for detailed
information on wireless security configuration.
Next Click Next to confirm your selection and advance to the Encryption Type screen.
Exit Click Exit to discard changes and return to the Add New Profile screen.
Table 13 Profile: Wireless Setting: Select a Channel (continued)
LABEL DESCRIPTION